Fuel Proof Installing FuelSense By Capt. Ken Kreisler — April 2004 1. The first step is to remove the old float switch assembly. 2. Slip in the stainless steel sensor housing, making sure the gasket is in place. Secure with the proper hardware. 3. Slip in the sensor, and screw it down. Finally, wire the components into the existing wiring of the old system as shown on page 92. Photos: Craig Wallace Dale Next page > FuelSense Wiring > Page 1, 2, 3, 4 ‹ Fuel Proof Page 2 up Fuel Proof Page 4 › This article originally appeared in the March 2004 issue of Power & Motoryacht magazine.