How to Tune Your Own Fishfinder

Set It Yourself

Here are Capt. Mark DeBlasio’s steps to tuning your own fishfinder:Fishfinder screenshot

  1. Turn your filters off. Turn your noise reduction and clutter down to the low level.
  2. Increase your depth range manually to 2  imes the depth of the water you’re in. Example: If you’re in 40 feet of water, set your depth range at 100 feet.
  3. At that point you turn your gain down to minimum. Then start increasing your gain in increments. The bottom will show up at the 40-foot mark.
  4. Continue to increase your gain until you see a repeat echo at double the depth of the water you’re in. So in our example, if you’re at 40-foot depths, you’ll see a repeat of the bottom at 80 feet. When your gain is set right, that echo will be about half as strong as your first echo at 40 feet. Now you have a good baseline for your gain setting.
Vetus Maxwell Tip of the Week

Hot Today

Featured Brands

Costa Palmos logo MCY logo
HMY Yacht Sales logo Volvo Penta logo
Absolute logo Sunseeker

Boat-Name Generator

cube puzzel Thinking of a unique name for your new boat can be tough, that's why we created a Boat Name Generator.
Try it here. ▶

Select Brokerage