Ocean 70 Super Sport

PMY Boat Test: Ocean 70 Super Sport
Ocean 70 Super Sport — By Capt. Ken Kreisler June 2000

Two Good Reasons...and More
The Ocean 70 Super Sport combines bluewater fishability with family comfort.
 More of this Feature

• Part 1: Ocean 70
• Part 2: Ocean 70 continued
• Ocean 70 Specs
• Ocean 70 Deck Plan
• Ocean 70 Acceleration Curve
• Ocean 70 Photo Gallery

 Related Resources
• Boat Test Index

 Elsewhere on the Web
• Ocean Yachts

I was sitting in the offices of Ocean Yachts, having just returned from two days in the Florida Keys aboard the new 70 Super Sport. "As soon as we decided to go this big," John Leek, Ocean Yachts’ president, told me, "we committed ourselves to making her everything Ocean is known for. We wanted her to be the best there is."

He certainly had his work cut out for him. Thanks to a booming economy, the market for 50-foot-plus sportfishermen is red hot, and demand has left some builders, Ocean included, with a six- to nine-month backlog. Devoid of resources it would normally have, the company would have to expend a lot more effort than it usually did when designing a new boat. But as Leek said, Ocean was committed.

To compensate, Leek had Dave Martin, who has designed all of the company’s boats, take a hard look at Ocean’s 66 Super Sport. Although successful, the 66, in production since October 1992, was due for a modernization, and a 70-foot length would provide better performance and more accommodations. "We wanted Martin’s design to provide the most up-to-date hull configuration possible to compete in the bluewater sportfish arena while being wife- and family-friendly," Leek explains.

The first step was to build the boat tough, something I observed first-hand on an earlier visit to the factory when hull number one was being pulled from the mold. Her solid-FRP bottom is protected with vinylester resin for blister resistance. To save weight while maximizing strength, Divinycell of varying thickness is used in the hull sides, hardtop, side decks, and decks. Her FRP stringer system, built outside the boat using aluminum molds that yield a precise fit, is foam-cored for sound deadening and bonded to the hull. Engine beds are of encapsulated steel plate, drilled and tapped to accept the engine mounts.

Instead of using foam or wood in the way of through-hulls, Ocean uses additional FRP laminations, which it says offer less chance of water infiltration to the substrate. The superstructure is joined to the hull with a shoebox joint: The overlapping deck is fastened to the hull with stainless steel screws, bedded with sealant, and then laminated with two layers of fabmat. To ensure easy cleanup, bilges are gelcoated and Awlgripped.

Watching the hull being marked and measured for bulkheads, wiring, plumbing, five fuel tanks (three forward and two saddles), and machinery spaces made it difficult to imagine the finished product, but Leek laid out the floor plan for me. "Among the first things we considered in the design process was beam," he says. It’s considerable: 19'8", which allows for four staterooms, these being a forepeak VIP, port and starboard double berths aft of that, and the amidships master, all with en suite heads and all with at least 6'6" headroom. There’s even a laundry room aft of the port stateroom with side-by-side washer and dryer units, a six-foot-long hinged countertop over the appliances, and a freezer in the port bulkhead.

Next page > Ocean 70 continued > Page 1, 2, 3, 4, 5, 6

This article originally appeared in the January 2003 issue of Power & Motoryacht magazine.

Vetus Maxwell Tip of the Week

Hot Today

Featured Brands

Costa Palmos logo MCY logo
HMY Yacht Sales logo Volvo Penta logo
Absolute logo Sunseeker

Boat-Name Generator

cube puzzel Thinking of a unique name for your new boat can be tough, that's why we created a Boat Name Generator.
Try it here. ▶

Select Brokerage