Subscribe to our newsletter

Panbo Marine Electronics Blog

inReach SE, will the screen do it?

By Panbo Marine Electronics | Posted 2013-04-04 08:29

Written by Ben Ellison on Apr 4, 2013 for Panbo, The Marine Electronics Hub

DeLorme_inReach_SE_collage_Panbo.jpg

I was so focused on finally heading north that I forgot the April 1 announcement of DeLorme's new inReach SE, even though one standard step in getting Gizmo underway these days is firing up the original inReach for tracking, messaging, and much more (as discussed here last fall). But my forgetfulness does not indicate a lack of appreciation for the new model (which I've already handled briefly in prototype form). To the contrary, I think the SE (Screen Edition)  will likely make a lot of boaters as enthusiastic about the whole inReach concept as I've already become...

Read Post

Paul's Cape Dory 25, just doing it!

By Panbo Marine Electronics | Posted 2013-03-27 12:52

Written by Ben Ellison on Mar 26, 2013 for Panbo, The Marine Electronics Hub

1984_Cape_Dory_25_at_Osprey_cPanbo.jpg

What the heck? This morning In Myrtle Beach it was the same frosty 36 degrees as it was in Camden, Maine. I've got lots more install work I can do before heading north, but it's fun to check out the odd lot of early ICW cruisers who turn into Osprey Marina's narrow entrance channel. Particularly curious was this venerable Cape Dory 25 that came in looking like it had been knocking around at sea. In fact it had just come non-stop and single-handed from St. Augustine, Florida,  and had gotten there mostly offshore from Cape May, New Jersey, just last month. Yes, in February, and the owner's previous sailing experience was aboard a Sunfish on a lake. I had to know more!

Read Post

Gizmo's antenna mast 2013: FLIR, Rogue, Wilson & more

By Panbo Marine Electronics | Posted 2013-03-25 11:19

Written by Ben Ellison on Mar 25, 2013 for Panbo, The Marine Electronics Hub

Gizmo_3-2013_new_antenna_rig_from_bow_cPanbo.jpg

I've heard it said that if you heeded all the manufacturer advice about antenna placement, you'd need a boat 100-feet long with four or five masts. I've been meaning to ask Panbo readers about how to best use Gizmo's single (though beefy) antenna mast, but instead I went and rejiggered everything last week and your advice will have to wait for the next revision. What mainly drove the change is the long term loan of a FLIR M-Series camera system, which certainly deserves the premier masthead position...

Read Post

The Equinox, celestial mechanics & pesky "True Wind"

By Panbo Marine Electronics | Posted 2013-03-20 11:15

Written by Ben Ellison on Mar 20, 2013 for Panbo, The Marine Electronics Hub

sun_path_source_unkown.jpg

I'm not a pagan but my first wedding was on the Summer Solstice in 1976 and the second was on the Vernal Equinox in 1993. So, yes indeed, today we're celebrating twenty years wonderfully together (though right now about a thousand miles physically apart). But I want to write about what largely drove those wedding date decisions: my fascination with celestial mechanics, largely acquired through marine navigation, particularly the celestial kind. I learned about the apparent and true motions of the heavenly bodies, the foundations of geography, and what makes this such a balanced day on earth... 

Read Post

MIBS CZone tour, enabling the car-like boat

By Panbo Marine Electronics | Posted 2013-03-18 08:28

Written by Ben Ellison on Mar 18, 2013 for Panbo, The Marine Electronics Hub

MIBS2013_BEP_Jarrod_Sager_Scout_Steve_Potts_cPanbo.jpg

In Miami Actuant Electrical invited a few boating writers like Ed Sherman, Steve D'Antonio and myself to tour several production boats that have chosen to use BEP CZone distributed power and digital switching systems. A highlight for me was getting to hear the founder of Scout Boats explain why he would do such a crazy thing. I joke of course -- and there's an argument that you have to be a little nuts to build boats anyway -- but Steve Potts (seen to the right of BEP's Jarrod Sagar above and interviewed here in Soundings) made a compelling case for why systems like CZone are critical to creating boats that really truly modern customers...

Read Post

Furuno at MIBS 2013; CHIRP, FCV587/627, and NavPilot FPS8

By Panbo Marine Electronics | Posted 2013-03-12 12:37

Written by Ben Ellison on Mar 12, 2013 for Panbo, The Marine Electronics Hub

Furuno_making_video_MIBS_2013_cPanbo.jpg

When I was at the in-water powerboat portion of the Miami show before it opened one morning, I discovered Furuno marketing manager Jeff Kauzlaric and product manager Eric Kunz making video. Of course I interrupted them for a photo but I was also hoping to see their long-rumored CHIRP fishfinder in action. But while it turned out that the big sonar screen behind Eric was not showing CHIRP, Furuno did announce the new DFF1-UHD during the show and Eric showed me the nifty NavPilot Safe Helm and Power Assist modes just about ready for release...

Read Post

My Pebble, more PAN in Panbo

By Panbo Marine Electronics | Posted 2013-03-11 11:58

Written by Ben Ellison on Mar 9, 2013 for Panbo, The Marine Electronics Hub

Pepple_watch_update_n_faces_cPanbo.jpg

I've been waiting so long that disappointment loomed large. It was mid-April last year when I became a Kickstarter 'backer' in the Pebble E-Paper Watch for iPhone and Android, which really just meant that I might get a good deal by buying one upfront for delivery the following September. But I wasn't the only geek who thought they'd sniffed out a bargain. Though Pebble's Kickstarter goal was only $100,000, almost 69,000 backers sent them over 10 million dollars! Which was neat in the sense that the Pebble people could then make the watch waterproof and add other features, but not so great in that suddenly they had a LOT of watches to build, which took much longer than 'estimated'. However, I've been smiling about Pebble ever since I opened my mailbox last week and found the box with "It's Time" printed on it in large, ironic type...

Read Post

AC34 Mark/VIP vessels, seeking perfection

By Panbo Marine Electronics | Posted 2013-03-07 09:07

Written by Dan Corcoran on Mar 7, 2013 for Panbo, The Marine Electronics Hub

AC_Mark_Boat_Newport_cDCorcoran_for_Panbo.jpg

A visit to the America's Cup World Series in Newport, RI in June 2012 provided an opportunity to tour the engineering spaces and helm of this second-generation mark/VIP boat as a follow-up to Ben's visit to hull number one. Before the engineering tour I spent the day on the race course in the vessel's predecessor, observing the racing and learning what drove the design improvements to this latest generation.

Read Post

Navico's numbers, should you care?

By Panbo Marine Electronics | Posted 2013-03-05 10:42

Written by Ben Ellison on Mar 5, 2013 for Panbo, The Marine Electronics Hub

Navico_claimed_2012_market_share_growth.jpg

As a privately held corporation Navico doesn't have to reveal anything about its financial state, but last week it issued a proud press release claiming a dramatic 15% sales increase in 2012, which resulted in revenues of 256 million dollars and EBITDA earnings of 41.4 million. And at the Las Palmas B&G event, the mother company added some claims about what their numbers meant versus the competition, as seen in the slide above. Is Navico painting a fair picture of where the recreational marine electronics market is at? Does it matter to consumers anyway?

Read Post

Samsung Chromebook, your $129 'burner' boat laptop?

By Panbo Marine Electronics | Posted 2013-03-04 12:25

Written by Ben Ellison on Mar 3, 2013 for Panbo, The Marine Electronics Hub

Samsung Chromebook stack.jpg

Before discussing my brief but positive experience with a Samsung Chromebook, I have some important advice. Do not brag about how little financial (or data) risk is involved in boating (or traveling) with this 11.6-inch, 2.4-pound laptop even though it looks and acts something like a precious MacBook Air. There's a fair bit of truth to the brag, but the deities of humility may then make you prove the point by, say, leaving your nice new Chromebook on a airport security belt in the Grand Canary Islands...

Read Post